Vertibreak® rainscreen insulation is an exterior wall insulation panel system that provides both insulation and an air/drainage rainscreen cavity in one product, eliminating the need in many cases for the use of furring strips as your rainscreen cavity. 2'x4' (610mm x 1220mm), 4'x4', or 4'x8' panels are recommended for application on above grade walls.
Vertibreak® provides a drainable, continuous insulation panel which not only contributes to the energy efficiency of the wall expected of an exterior insulation and to the durability of the wall system expected from a rainscreen cavity, but it also reduces thermal bridging through the studs, resulting in a superior thermal performance to the building envelope when compared to many traditional wall systems.
For stucco and lightweight thin veneer stone applications, Vertibreak 4-S, 6-S, and VC-S come with an exterior 'sacrificial layer' covering the front of the insulation in order to block stucco and mortar from filling the cavity.
No more furring strips! Use Vertibreak® to reduce labour and framing costs by meeting required insulation values and also providing a rainscreen at the same time.
Helps meet your local building code’s new energy and rainscreen requirements. Vertibreak® increases the R-value/RSI of your exterior wall and provides for drainage and drying, saving on energy bills and improving your wall.
Vertibreak® isn’t a typical polystyrene insulation. It’s not only designed to increase your insulation/energy values and manage moisture but it’s designed to withstand the rigours of your jobsite.
Depending on your local building code, different insulation value requirements may apply. Use the Vertibreak® products below, to meet these zones as described in the National Building Code of Canada, the Vancouver Building Bylaw, and others.
Order Vertibreak® with Vertibreak® Nails (for fibre cement)!
Click the link to download the PDF.
HEY iPhone users, if you see a grey screen, scroll up and down to see PDF
© 2019 POWERHOUSE PRODUCTS